China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray

China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray

China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for 400kv High Voltage Generator, X Ray Tube Seasoning, Vertical Bucky Stand, For additional queries or should you might have any question regarding our goods, make sure you do not hesitate to call us.
China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray Detail:

KL10-0.6/1.8-110 Stationary anode X-Ray tube is especially designed for Mobile Units for radiography, for Portable Radiographic Units, and available for a nominal tube voltage with high frequency or DC generator.
The integrated high quality tube with glass design has one super imposed focal spot and a reinforced anode.
The high anode heat storage capacity ensures a wide range of applications for mobile, portable applications. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

KL10-0.6/1.8-110 Stationary anode X-Ray tube is especially designed for Mobile Units for radiography, for Portable Radiographic Units, and available for a nominal tube voltage with high frequency or DC generator.

Nominal Tube Voltage 110kV
Nominal Focal Spot small:0.6   large:1.8(IEC60336/2005)
Filament Characteristics small:Ifmax=4.5A,Uf=5±0.5  large:Ifmax=4.5A,Uf=6.3±0.8V
Nominal Input Power(at 1.0s) small:spot0.6kW  large:spot5.2kW
Maximum Continuous Rating 225W
Anode Heat Storage Capacity 30kJ
Target Angle 15°
Target Material Tungsten
Inherent Filtration Min 0.6mmAl equivalent at 75kV
Weight approx600g

AKL10-0.6-1.8-110

Maintaining seasoning schedule

Prior to usage, season the tube in accordance with the seasoning schedule given below until the required tube voltage is attained. Example given – needs to revise by the manufacturer and specified in the data sheet of the part: Initial incoming seasoning and seasoning schedule for idle period (more than 6 months) Circuit: DC (Center grounded)

KL10 老练图

When the tube current is unstable in seasoning, immediately switch off the tube voltage and after an interval of 5 minutes or more, increase the tube voltage gradually from the low voltage while making sure that the tube current is stable. The withstand voltage performance of the tube unit will be lowered as the exposure time and the number of operation increase. Stain-like impact traces might appear on the x-ray tube target surface by slight discharge in the course of the seasoning. These phenomena are one process to recover the withstanding voltage performance at that time. Therefore, if it is in stable operation at the maximum tube voltage of seasoning subsequent to them, the tube unit can be used without any interference to its electrical performance which in use.

Elevated anode heat storage capacity and cooling
Constant high dose yield
Excellent lifetime


Product detail pictures:

China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray detail pictures

China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray detail pictures

China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray detail pictures


Related Product Guide:

Our primary purpose is to give our shoppers a serious and responsible company relationship, giving personalized attention to all of them for China wholesale Anode X Ray Tube Factories - Mobile X-ray Tube CEI 110-15 – Sailray , The product will supply to all over the world, such as: Ethiopia, Colombia, Paris, We've been adhering to the philosophy of attracting customers with the best items and excellent service. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Alma from Gambia - 2017.10.23 10:29
    It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
    5 Stars By Olga from moldova - 2017.09.26 12:12
    Write your message here and send it to us