China wholesale Rotating Envelope X Ray Tube Factory -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray

China wholesale Rotating Envelope X Ray Tube Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray

China wholesale Rotating Envelope X Ray Tube Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for X Ray Tube, Gas Tube X Ray, X Ray Tube Cost, We welcome new and previous customers from all walks of lifestyle to contact us for long run organization relationships and mutual achievements.
China wholesale Rotating Envelope X Ray Tube Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray Detail:

Maximum Operating Voltage 150KV
Focal Spot Size 0.6/1.2
Diameter 73mm
Target Materia RTM
Anode Angle 12°
Rotation Speed 2800/8400RPM
Heat Storage 300kHU
Maximum Continuous Dissipation 750W
 Large Focus 5.4A
Small Focus 5.4A
Inherent Filtration 1mmAl/75KV(IEC60522/1999)
Maximum Power(0.1S) (50/60Hz)  20KW/50KW

(150/180Hz) 30KW/74KW

SRMWTX (2)
SRMWTX (1)
SRMWTX (3)
SRMWTX (4)

Anode drive:150Hz/180Hz

X-ray tube will emit X-ray when it is energized with high voltage, Special knowledge should be required and cautions need to be taken when handing it.
1.Only a qualified specialist with X-Ray tube knowledge should assemble,maintain and remove the tube.
When mounting tube inserts adopt proper caution, in order to avoid glass bulb breaking and fragments projection. Please use protective gloves and glasses.
2.Tube insert connected to H.V.supply is radiation source:be sure to take all necessary safety cautions.
3.Wash thoroughly with alcohol the external surface of tube insert(care of fire risk).Avoid contact of dirty surfaces with cleaned tube insert.
4.Clamp system inside housing or self-contained units must not mechanically stress the tube.
5.After installation, check the right working of the tube(no fluctuation of tube current nor crackling).
6.Comply with insert thermal parameters, planning and programming the exposure parameters and cooling pauses. Housing or self-contained units must be provided with an adequate thermic protection.
7.Voltages indicated in charts are valid for transformer supplied with ground center.
8.It is extremely important to observe the connection diagram and the grid resistor value. Any change could modify the dimensions of the focal spot, also varying diagnostic performances or overloading anode target.
9.Tube inserts contain environment polluting materials, particularly lead liner tubes, Please apply to qualified operator for waste disposal, according to local regulation requirements.
10.When any abnormalities are found during operation, immediately switch off the power supply and contact the service engineer.

◆This high vacuum product is produced according to state-of-the-art technology. To prevent implosion please handle with care and use protective devices, e.g.glasses!

◆In the interest of complying with legal requirements concerning the environmental compatibility of our products(protection of natural resources, avoidance of waste)we endeavor to reuse components and to return them to the production cycle. We guarantee the functioning, quality and life of these components by taking extensive quality assurance measures, just as for factory-new components.


Product detail pictures:

China wholesale Rotating Envelope X Ray Tube Factory -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray detail pictures

China wholesale Rotating Envelope X Ray Tube Factory -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray detail pictures


Related Product Guide:

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of China wholesale Rotating Envelope X Ray Tube Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray , The product will supply to all over the world, such as: panama, Chicago, moldova, Item have passed by means of the national qualified certification and been well received in our main industry. Our expert engineering team will often be ready to serve you for consultation and feedback. We are able to also deliver you with cost-free samples to meet your specifications. Ideal efforts will probably be produced to provide you the most beneficial service and solutions. Should you be interested in our company and solutions, please make contact with us by sending us emails or call us straight away. To be able to know our solutions and enterprise. ar more, you'll be able to come to our factory to see it. We'll constantly welcome guests from all over the world to our firm. o build business enterprise. elations with us. Please feel absolutely free to speak to us for organization. nd we believe we will share the best trading practical experience with all our merchants.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Matthew Tobias from Monaco - 2017.08.28 16:02
    Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
    5 Stars By Jamie from Holland - 2018.07.12 12:19
    Write your message here and send it to us