OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray

OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray

OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

To continually enhance the management technique by virtue of your rule of sincerely, great faith and high-quality are the base of company development, we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Type Of X Ray Tube, Radiographic Filters, Rotating Anode X Ray Tube Definition, Sincerely hope we are growing up together with our prospects all over the environment.
OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray Detail:

This tube is designed for replace TOSHIBA D-051 paranoiac dental x-ray unit and available for nominal tube voltage with self-rectified or DC circuit.
The high anode heat storage capacity ensures a wide range of applications for intra-oral dental application. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

This tube is designed for replace TOSHIBA D-051 paranoiac dental x-ray unit and available for nominal tube voltage with self-rectified or DC circuit.

Nominal Tube Voltage 100kV
Nominal Inverse Voltage 115kV
Nominal Input Power(at 1.0s) self-rectified: 840W  DC: 1750W
Max. Anode Cooling Rate 265W
Max. Anode Heat Content 30kJ
Filament Characteristics Ifmax3.5A,5.5±0.5V
Nominal Focal Spot 0.5 (IEC60336/2005)
Target Angle
Target Material Tungsten
Cathode type W filament
Permanent Filtration Min. 0.5mmAl/50 kV(IEC60522/1999)
Dimensions 145mm length by 50mm diameter
Weight Approx.480 grams

KL5A-0.5-105

Maintaining seasoning schedule
Prior to usage, season the tube in accordance with the seasoning schedule given below until
the required tube voltage is attained. Example given – needs to revise by the manufacturer
and specified in the data sheet of the part:
Initial incoming seasoning and seasoning schedule for idle period (more than 6 months)
Circuit: DC (Center grounded)

KL5A 老练图
When the tube current is unstable in seasoning, immediately switch off the tube voltage and
after an interval of 5 minutes or more, increase the tube voltage gradually from the low
voltage while making sure that the tube current is stable.
The withstand voltage performance of the tube unit will be lowered as the exposure time and
the number of operation increase. Stain-like impact traces might appear on the x-ray tube
target surface by slight discharge in the course of the seasoning. These phenomena are one
process to recover the withstanding voltage performance at that time.
Therefore, if it is in stable operation at the maximum tube voltage of seasoning subsequent
to them, the tube unit can be used without any interference to its electrical performance
which in use

Elevated anode heat storage capacity and cooling
Constant high dose yield
Excellent lifetime


Product detail pictures:

OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray detail pictures

OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray detail pictures

OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray detail pictures


Related Product Guide:

Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for OEM High Quality Lead Lined Goggles Factories - Panoramic Dental X-ray Tube TOSHIBA D-051 – Sailray , The product will supply to all over the world, such as: Chile, Manchester, Costa Rica, The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products and solutions have been exported to more than 15 countries in the world and have been widely used by customers.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Arthur from Malaysia - 2017.02.18 15:54
    Hope that the company could stick to the enterprise spirit of Quality, Efficiency, Innovation and Integrity, it will be better and better in the future.
    5 Stars By Michaelia from Libya - 2018.04.25 16:46
    Write your message here and send it to us