OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray

OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray

OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Rotating Anode Xray Tube, X Ray Lead Glass, Varian X Ray Tube, Make sure you come to feel absolutely cost-free to speak to us for organization. nd we think we're going to share the ideal trading practical experience with all our retailers.
OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray Detail:

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit
The integrated high quality tube with glass design has one super imposed focal spot and a reinforced anode. The high anode heat storage capacity ensures a wide range of applications for panoramic dental application. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit.

Nominal Tube Voltage 105kV
Nominal Inverse Voltage 115kV
Nominal Input Power(at 1.0s) 950W
Max. Anode Cooling Rate 250W
Max. Anode Heat Content 35kJ
Filament Characteristics Ifmax3.5A,5.5±0.5V
Nominal Focal Spot 0.5 (IEC60336/2005)
Target Angle
Target Material Tungsten
Cathode type W filament
Permanent Filtration Min. 0.5mmAl/50 kV(IEC60522/1999)
Dimensions 140mm length by 42mm diameter
Weight 380 grams

KL5-0.5-105

Cautions
Read the cautions before using the tube
X-ray tube will emit X –ray when it is energized with high voltage, Special knowledge
should be required and cautions need to be taken when handling it。
1. Only a qualified specialist with X-Ray tube knowledge should assemble, maintain
and remove the tube。
2. Sufficient care should be taken to avoid strong impact and vibration to the tube
because it is made of fragile glass。
3. Radiation protection of the tube unit must be sufficiently taken。
4. The minimum sorce-skin distance (SSD) and the minimum filtration should match the
regulation and meet the standard。
5. The system should have proper overload protection circuit , the tube may be
damaged due to only one overload operation。
6. When any abnormalities are found during operation , immediately switch off the
power supply and contact the service engineer。
7. if the tube is with a lead shield, to dispose of lead shield must meet government
regulations。

Elevated anode heat storage capacity and cooling
Constant high dose yield
Excellent lifetime


Product detail pictures:

OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray detail pictures


Related Product Guide:

carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for OEM High Quality X Ray Filters Radiology Manufacturers - Dental X-ray Tube CEI OPX105 – Sailray , The product will supply to all over the world, such as: Serbia, Paraguay, Czech Republic, Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We are looking forward to cooperating with friends from all over the world.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Miranda from Florida - 2018.06.19 10:42
    Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Agustin from Hungary - 2017.02.18 15:54
    Write your message here and send it to us