X-ray Hand switch is an electric control parts with two step trigger, can be used for controlling the on-off of electrical signal, photographic equipment and medical diagnostic X-ray photography exposure. X-ray exposure Hand switch, used OMRON micro switch as component contacts, is a hand-held switch which has two stepping switches and with fixed trestle.
This type of x-ray machine switch can be 3 cores and 4 cores. The coil cord length can be 2.7m and 4. 5m after fully stretched. Its electrical life can reach to 200 thousand times while its mechanical life can reach to 1.0millioin times.
X-ray exposure Hand switch is comply with the national safety standards: GB15092.1-2003 "the first part of the medical electrical equipment: general requirements for safety" related provisions. Get CE, ROHS approval.
|Working Voltage(AC/DC)||Working Current(AC/DC)||Shell Material||
|125V/30V||1A/2A||White, ABS engineering plastics||Ⅰstage||Concentric line||Ⅱstage|
|White + Red||green + Black|
|125V||1A||White, engineering plastics||Ⅰstage||Ⅱstage|
Cores:three cores, four cores
Useful time(Mechanical life): 1.0 million times
Useful time(Electrical life): 100 thousand times
When pressing the button, it is connected while loosing it is cut. Press the button to the first stage, the first grade is connected. This is for x-ray preparation. Then do not loose your thumb, and press the button to the bottom, the second grade is connected while the first grade remains connected. This is for x-ray operation.
|Environment Temperature||Relative Humidity||Atmospheric Pressure|